Back in 2003, the pressure range value for Wacom pen tablets was set to 2048. That's a #define in the driver, but it shouldn't matter because we also advertise this range as part of the device description in the X Input protocol. Clients should be using that advertised min/max range and scale appropriately, in the same way as they should be doing this for the x/y axis ranges.
Fast-forward to 2017 and we changed the pressure range. New Wacom devices now use ~8000 levels, but we opted to just #define it in the driver to 65536 and be done with it. We now scale all models into that range, with varying granularity based on the physical hardware. It shouldn't matter because it's not tied to a reliable physical property anyway and the only thing that matters is the percentage of the max value (which is why libinput just gives you a [0, 1] range. Hindsight is a bliss.).
Slow-forward to 2017-and-a-bit and we received complaints that pressure handling is now broken. Turns out that some applications hardcoded the old 2048 range and now get confused, because virtually any pressure will now hit that maximum. Since those applications are largely proprietary ones and cannot be updated easily, we needed a workaround to this. Jason Gerecke from Wacom got busy and we now have a "Pressure2K" option available in the driver. If set, this option will scale everything into the 2048 range to make sure those applications still work. To get this to work, the following xorg.conf.d snippet is recommended:
Section "InputClass" Identifier "Wacom pressure compatibility" MatchDriver "wacom" Option "Pressure2K" "true" EndSectionPut it in a file that sorts higher than the wacom driver itself (e.g. /etc/X11/xorg.conf.d/99-wacom-pressure2k.conf) and restart X. Check the Xorg.log/journal for a "Using 2K pressure levels" message, then verify it works by running xinput list "device name". xinput should show a range of 0 to 2048 on the third valuator.
$> xinput list "Wacom Intuos4 6x9 Pen stylus" Wacom Intuos4 6x9 Pen stylus id=25 [slave pointer (2)] Reporting 8 classes: Class originated from: 25. Type: XIButtonClass Buttons supported: 9 Button labels: None None None None None None None None None Button state: Class originated from: 25. Type: XIKeyClass Keycodes supported: 248 Class originated from: 25. Type: XIValuatorClass Detail for Valuator 0: Label: Abs X Range: 0.000000 - 44704.000000 Resolution: 200000 units/m Mode: absolute Current value: 22340.000000 Class originated from: 25. Type: XIValuatorClass Detail for Valuator 1: Label: Abs Y Range: 0.000000 - 27940.000000 Resolution: 200000 units/m Mode: absolute Current value: 13970.000000 Class originated from: 25. Type: XIValuatorClass Detail for Valuator 2: Label: Abs Pressure Range: 0.000000 - 2048.000000 Resolution: 1 units/m Mode: absolute Current value: 0.000000 Class originated from: 25. Type: XIValuatorClass Detail for Valuator 3: Label: Abs Tilt X Range: -64.000000 - 63.000000 Resolution: 57 units/m Mode: absolute Current value: 0.000000 Class originated from: 25. Type: XIValuatorClass Detail for Valuator 4: Label: Abs Tilt Y Range: -64.000000 - 63.000000 Resolution: 57 units/m Mode: absolute Current value: 0.000000 Class originated from: 25. Type: XIValuatorClass Detail for Valuator 5: Label: Abs Wheel Range: -900.000000 - 899.000000 Resolution: 1 units/m Mode: absolute Current value: 0.000000
This is an application bug, but this workaround will make sure new versions of the driver can be used until those applications have been fixed. The option will be available in the soon-to-be-released xf86-input-wacom 0.35. The upstream commit is d958ab79d21b57141415650daac88f9369a1c861.
Edit 02/06/2017: wacom devices have 8k pressure levels now.
Just as an FYI the recent devices that resulted in this issue have ~8,000 levels of pressure not ~4,000.
ReplyDeleteoh, right, thanks, fixed it in the post
ReplyDeleteI apologize if this comment is out of place but I can't seem to find an answer after days of searching the Internet. What I am trying to determine is if libinput on X11 supports serial mice. What I have is a tiny trackball that outputs serial data in the old Microsoft two-button serial mouse format. I can interface to it at the console level using gpm but I cannot figure out how to get it to work under X11. I was thinking that it might be possible to provide the mouse data to X11 via the gpm repeater capability, but I have not been able to get X11 configured properly. Any suggestions would be greatly appreciated.
ReplyDeleteMac
Hi,
ReplyDeleteThanks for the post, I've been looking around for this problem recently and it's the easiest fix for us for using Foundry's nuke/mari apps with centos7.4
worked like charm.